Hi to all,
I am using s71200 plc...
I am sending some spec values from my plc to the module1 continuously through TCP communication.... Now in that same program i have to send a frame to a module2(both module1&2 are third party devices) which has to be send continuously without disconnecting the transmission..
Now the issue i am facing is, i was able to communicate with either one of the module , to communicate with other i have to disconnect one communication..
But my application is to send data concurrently to both the module1 and module2 which are having different ip add & port address... First of all without disconnecting the communication, the data transmission between 2 slaves and one master concurrently is possible or not????
Pls guide me
Regards,
Nelliyan
I am using s71200 plc...
I am sending some spec values from my plc to the module1 continuously through TCP communication.... Now in that same program i have to send a frame to a module2(both module1&2 are third party devices) which has to be send continuously without disconnecting the transmission..
Now the issue i am facing is, i was able to communicate with either one of the module , to communicate with other i have to disconnect one communication..
But my application is to send data concurrently to both the module1 and module2 which are having different ip add & port address... First of all without disconnecting the communication, the data transmission between 2 slaves and one master concurrently is possible or not????
Pls guide me
Regards,
Nelliyan