italian_virus
Member
Hello all,
I was hoping if you guys can help me out.
The situation that i have is that i need to control 6 pistons that have two solenoid valves (one to advance and one to retract) now i need to control these pistons in a curtain sequence. I plan on using sequencers though the catch is i CAN NOT use timers to control them. Now i have 12 outputs (solenoid valves) and 12 inputs (sensors showing when the piston is fully advanced and fully retracted). Also this must be done in RSLogix 500.
Any help would be greatly appreciated
Thanks
I was hoping if you guys can help me out.
The situation that i have is that i need to control 6 pistons that have two solenoid valves (one to advance and one to retract) now i need to control these pistons in a curtain sequence. I plan on using sequencers though the catch is i CAN NOT use timers to control them. Now i have 12 outputs (solenoid valves) and 12 inputs (sensors showing when the piston is fully advanced and fully retracted). Also this must be done in RSLogix 500.
Any help would be greatly appreciated
Thanks