silva.foxx
Member
Well... hello sailors!
I have a Siemens S7-315-2DP with two CP 342-2 ASi modules.
The PLC controls a warehouse conveyor system with 4I4O ASi nodes.
I wish to monitor the in/outs of the ASi nodes.
In the HW Config it states the I/Q addresses as 276...291.
In FC2 //Read Asi network is the following;
L PID 276
T DB1.DBD 0
L PID 280
T DB1.DBD 4
L PID 284
T DB1.DBD 8
L PID 288
T DB1.DBD 12
How would I view the inputs from this block, please?
At the bottom of my STEP7 screen is a tabbed screen with [4: Address info.] in which PID276, PID280, PID284 and PID288 are listed with a BIN @Status value column showing;
2#0000_0000_0000_0000_0000_0000_0000_0000
Can the bits be monitored here?
Thanks in advance -silva.foxx
I have a Siemens S7-315-2DP with two CP 342-2 ASi modules.
The PLC controls a warehouse conveyor system with 4I4O ASi nodes.
I wish to monitor the in/outs of the ASi nodes.
In the HW Config it states the I/Q addresses as 276...291.
In FC2 //Read Asi network is the following;
L PID 276
T DB1.DBD 0
L PID 280
T DB1.DBD 4
L PID 284
T DB1.DBD 8
L PID 288
T DB1.DBD 12
How would I view the inputs from this block, please?
At the bottom of my STEP7 screen is a tabbed screen with [4: Address info.] in which PID276, PID280, PID284 and PID288 are listed with a BIN @Status value column showing;
2#0000_0000_0000_0000_0000_0000_0000_0000
Can the bits be monitored here?
Thanks in advance -silva.foxx