(8{)} ( .)
Lifetime Supporting Member
Hello all Siemens people.
I've been tearing my hair out with something that should be trivial. Siemens tech support seems to have been separated at birth from Microsoft tech support, if you get my drift.
All I have to do is display the PLC connection status (Green = Good, Red = Bad) on the screen and generate an alarm when the status is bad.
I've been through the Siemens documents but they don't line up with TIA portal. I'm using a Siemens TP1200 comfort panel with an S7-1200 controller.
Is there anyone out there who's done this or who can send me an example?
Thanks,
Yosi
I've been tearing my hair out with something that should be trivial. Siemens tech support seems to have been separated at birth from Microsoft tech support, if you get my drift.
All I have to do is display the PLC connection status (Green = Good, Red = Bad) on the screen and generate an alarm when the status is bad.
I've been through the Siemens documents but they don't line up with TIA portal. I'm using a Siemens TP1200 comfort panel with an S7-1200 controller.
Is there anyone out there who's done this or who can send me an example?
Thanks,
Yosi