Siemens S7 300 valid Addresses

chikuni

Member
C
Join Date
May 2009
Location
Windhoek
Posts
12
Can some one refer me to a manual with all the valid addresses for Step 7 S 300 blocks and variables, I know now I0.1 and Q0.2 etc and also timers e.g. T2 T5 but I still want to know about designations and addresses for other blocks such as counters, etc.

I am sure some one will come up with the reference!

echi
 

Similar Topics

X
Valid Siemens S300 safety plc use ?
My boss insists that we use a Siemans 300 series Safety plc for the application of counting and timing pulses at 15 hz 50ms width using 317F-2 CPU...
Replies
4
Views
4,569
freddofrog
F
R
Modbus Master Siemens S7-300 - OB35?
Hi, I'm setting up a modbus master on an S7-300. It seems to work in OB1 but not when I use it in OB35. Does anyone have any ideas why? Could...
Replies
10
Views
94
Lare
L
ceilingwalker
ESA HMI and Siemens S7-300 question
Hello all. I have an ESA HMI that is connected to a Simatic S7-300 (CPU312). I have uploaded the program from the PLC which is written with Step7...
Replies
6
Views
1,453
ceilingwalker
ceilingwalker
M
Siemens S7 300 PLC replacement issue
Hello. There is a problem with Siemens S7 300. We got a replacement PLC but it does not run the program from the MMC. The new PLC is dated 2011...
Replies
3
Views
698
Rob...
R
M
Help with IP address on a Siemens Simatic S7300
Hi to all, Our company does not usually use Siemens PLCs, but have a press with one in it. We are trying to change the IP address in our Simatic...
Replies
2
Views
1,072
Maintenance Man
M
Back
Top Bottom