urlauber1
Member
Hello,I am getting the following fault messages on my MP270 display screen. "190011 tag DT_606_0_0 value could not be written to the PLC" also "1400000 connection established Steuerung-1, station 2
rack 0 , slot 3 "
This machine is still operating but when the fault messages appear
the push buttons are momentarilly disabled on the operator panel.
The message(s) usualy appear (for a couple of seconds)when you push one of the function keys.
The simatic MP270 is connected to an S7 414-3xj00-0ab0 plc via profibus communications .( I think ) My understanding of the communications is very limited.
Thanks
Dean
rack 0 , slot 3 "
This machine is still operating but when the fault messages appear
the push buttons are momentarilly disabled on the operator panel.
The message(s) usualy appear (for a couple of seconds)when you push one of the function keys.
The simatic MP270 is connected to an S7 414-3xj00-0ab0 plc via profibus communications .( I think ) My understanding of the communications is very limited.
Thanks
Dean