nestaroks
Member
I am relatively new to PLCs and I need a little help.
I have a SLC 500:
I can connect the PLC just fine, and play around with the input and outputs in slots 1 through 4.
Problem
But when I try to energize outputs on card slots 5 and 6, nothing happens. I don't get a physical light turning on in the actual PLC, nor do I get the output energizing in RSLogix 500.
I have set up the IO COnfiguration for all my cards.
Any thoughts are welcomed
Thanks in Advance
I have a SLC 500:
- 1747-L524 series C
- Power supply: 1746-p2
- Input Cards: 1746-IN16 (3x)
- Output Cards: 1746-OB16 (x3)
- 7 slot rack
I can connect the PLC just fine, and play around with the input and outputs in slots 1 through 4.
Problem
But when I try to energize outputs on card slots 5 and 6, nothing happens. I don't get a physical light turning on in the actual PLC, nor do I get the output energizing in RSLogix 500.
I have set up the IO COnfiguration for all my cards.
Any thoughts are welcomed
Thanks in Advance