spaceacealpha
Member
Anyone find a way to do DDV command on a Logix 5000 platform? I can't figure out how the double divide is calculating. Looks like hoodoo voodoo!
SLC 500 DDV Instruction to Logix 5000 Conversion
- Thread starter spaceacealpha
- Start date
bernie_carlton
Lifetime Supporting Member + Moderator
The DDV in the SLC500 was to work with 32 bit operands. But the native type (DINT) in RSLogix 5000 is already 32 bit. The normal DIV should work ok.
spaceacealpha
Member
OP
Thanks!
Similar Topics
I have a program that I've used 100 times.
SQO settings: File N7:0, Mask 0FFFFh, Dest B3:1, Control R6:0, Length 8, Pos 2.
Length & Position...
Everyone,
i am in the process of purchasing the Slc 500 version of software to support what we have and i have a question. Several of our...
In a slc 500 plc I am trying to move data with out using a lot of moves. I want to move data from n7:1 to n7:2 and data that was in n7:2 to n7:3...
Customer has a circa 2004 SLC-500 PLC. Fieldbus is a 1747-SDN DeviceNet scanner. Customer has SLC-500 file (.rss) with no comments. Has no *.dnt...
After I tried wiring, I used computer program communication to read the PLC N value, but received a NAK signal. And the DL3500 CHA light keeps...