Good morning. I notice there was some previous posts about this subject with Logix 5000. Would anyone happen to have any info or examples using 500 with a RS232 port off the processor? We are setting up a system with a R2000iA robot and a rotating unit to stamp scuba tanks. I have to provide 8 characters for a lot number that changes characters every 202 pieces. Any help would be greatly appreciated, thanks, Chris.
SLC 500 Programming with a Telesis TMC420 Pinstamper
- Thread starter jacchr
- Start date
Similar Topics
Good morning. I notice there was some previous posts about this subject with Logix 5000. Would anyone happen to have any info or examples using...
Hi all,
I am new to PLC programming and decided to build a test rig (photo enclosed) to try and teach myself how to do it.
I have written a...
I have a AB SLC 500. Can I use 6200 software to communicate with it? I have the 1747 programmer but I was kinda wanting to use a computer.
Thanks
Please help to find the documents for programming RSLogix 500 for AB/SLC 500 on the net. I am new in this product so any information will be big...
I have a program that I've used 100 times.
SQO settings: File N7:0, Mask 0FFFFh, Dest B3:1, Control R6:0, Length 8, Pos 2.
Length & Position...
