I am having problems with communicating to a remote SLC 5/04 via a Neulink SS-900 radio. I have no problem communicating to the radio through the scada host, but when I try to the SLC it won't respond at all most times and sometimes it will give small amounts of info back. If anyone has run into this in the past, please help.
SLC-500 Radio Communications
- Thread starter A_W
- Start date
Similar Topics
I have a program that I've used 100 times.
SQO settings: File N7:0, Mask 0FFFFh, Dest B3:1, Control R6:0, Length 8, Pos 2.
Length & Position...
Everyone,
i am in the process of purchasing the Slc 500 version of software to support what we have and i have a question. Several of our...
In a slc 500 plc I am trying to move data with out using a lot of moves. I want to move data from n7:1 to n7:2 and data that was in n7:2 to n7:3...
Customer has a circa 2004 SLC-500 PLC. Fieldbus is a 1747-SDN DeviceNet scanner. Customer has SLC-500 file (.rss) with no comments. Has no *.dnt...
After I tried wiring, I used computer program communication to read the PLC N value, but received a NAK signal. And the DL3500 CHA light keeps...