idowulawrence
Member
In a redundant slc 5/04 system, consisting of 2 slc 504 and a 1747-ASB, is it feasible to connect the redundant system to a an existing DH+ network by using the linked DH+ ports of the redundant processors?
slc 504 redundancy
- Thread starter idowulawrence
- Start date
Similar Topics
Has anyone ever seen this before. I have a SLC 504 running a very small program and it would seem the TON wouldn't start counting using the...
Probably a silly question and asked a hundred times already, but i tried to do some searching here and couldn't find this question.
I have 502's...
I have a SLC504 in the field that is communicating DH+ to several other SLC504 and the RS232 port is communicating to a panel view plus 1000. I...
As part of an upgrade I am working with 7 different SLC programs. I had the first program in a test controller in my office running and...
Hi,
I am having an issue on one of my station. It won't communicate after the power shutdown. If we cycle the power it is communicating , but I...
