got a slc100 and am using pcis to program. there is a program on slc100 and it requires me to enter a password to clear it with the pcis software. the manuals state to use handheld programmer enter 940 to clear, but the software wont take/use the same method. anyone know how to clear the program (memory) from the slc100 either by software or other. I tried pulling the battery and letting sit for week but program still active (of corse-but if I wanted it to stay it wouldn't have). any help would be appreciated. I already pilled it appart and tried shorting anything I could find. HELP. sparx: