Hello,
I have a 1747-L532 SLC503, I would like to execute a program under RSLogix500 from my PC to the PLC SLC503.
I have a RS232 to RS232 cable 1747-CP3. I connected the 1747 CP3 cable to the SLC503 DB9 port and the other end to the COM2 port on my PC.
The problem is that when I connect the cable to the SLC503, the light of the "RS232" button is always off, it does not light.
and when I going in RSLinx-> communication system-> configure drivers to configure my cable RS232 DF1, I selected "DF1 device" but I can not go online, it appears to me this message:
"emulator is decentralized"
"the target station is not a SLC500 PLC or micrologix"
Please someone can help me?
Thanks
I have a 1747-L532 SLC503, I would like to execute a program under RSLogix500 from my PC to the PLC SLC503.
I have a RS232 to RS232 cable 1747-CP3. I connected the 1747 CP3 cable to the SLC503 DB9 port and the other end to the COM2 port on my PC.
The problem is that when I connect the cable to the SLC503, the light of the "RS232" button is always off, it does not light.
and when I going in RSLinx-> communication system-> configure drivers to configure my cable RS232 DF1, I selected "DF1 device" but I can not go online, it appears to me this message:
"emulator is decentralized"
"the target station is not a SLC500 PLC or micrologix"
Please someone can help me?
Thanks