grnick50
Lifetime Supporting Member
Hello all,
I am connecting an 1769-L36ERM to a WinCC V13 professional SCADA using Ethernet IP.
I checked the ST80 Siemens HMI catalog and WinCC supports this PLC. My question is if this is ok with a standard Ethernet network adapter. I ask because in the catalog at the far left it says that the PC interface should be a CP1612 A2.
I know that this is not a fancy network adapter but I thought I should double check.
Regard Nik
I am connecting an 1769-L36ERM to a WinCC V13 professional SCADA using Ethernet IP.
I checked the ST80 Siemens HMI catalog and WinCC supports this PLC. My question is if this is ok with a standard Ethernet network adapter. I ask because in the catalog at the far left it says that the PC interface should be a CP1612 A2.
I know that this is not a fancy network adapter but I thought I should double check.
Regard Nik