Good Morning ,
I am trying to setup a PowerFlex 755 and I can't get my head wrapped around the digital I/O setup concept. It doesn't look like the way you can setup the PowerFlex 40's , etc. that you have a easy selection of what you want these I/O to do. The customer needs the following .........
DI 1 - Stop
DI 2. - Start
Relay Output 1 - Drive Running
Relay Output 2 - Fault
AI 1. - Speed Reference
AO 1 - Actual Speed
AO 2 - Torque 0-100%
Also , if I want just local control to start with where do I select to use the keypad for the speed reference . I have all the manuals , but it just takes you all over the place.
I'm sorry. It seems like the older I get the less patience I have . It really should be the other way around.
Thanks for your help.
I am trying to setup a PowerFlex 755 and I can't get my head wrapped around the digital I/O setup concept. It doesn't look like the way you can setup the PowerFlex 40's , etc. that you have a easy selection of what you want these I/O to do. The customer needs the following .........
DI 1 - Stop
DI 2. - Start
Relay Output 1 - Drive Running
Relay Output 2 - Fault
AI 1. - Speed Reference
AO 1 - Actual Speed
AO 2 - Torque 0-100%
Also , if I want just local control to start with where do I select to use the keypad for the speed reference . I have all the manuals , but it just takes you all over the place.
I'm sorry. It seems like the older I get the less patience I have . It really should be the other way around.
Thanks for your help.