phuz
Member
Customer has an issue with an Ultra3000 that gets the E19 error as soon as power enable is active and it tries to home.
Input 1 is Drive Enable and Input 2 is Start Homing.
Input 1 is triggered upon button press immediately followed by input 2.
The encoder is showing what appears to be valid position data. The tuning parameters haven't been changed and this machine has run for a long time. Are we most likely dealing with a bad Ultra3000?
Input 1 is Drive Enable and Input 2 is Start Homing.
Input 1 is triggered upon button press immediately followed by input 2.
The encoder is showing what appears to be valid position data. The tuning parameters haven't been changed and this machine has run for a long time. Are we most likely dealing with a bad Ultra3000?
Last edited: