RMA
Member
I've got a funny problem with WinCC Flex, so if anybody's got any ideas, I'd be grateful to hear them.
I've got a new project which is based very closely on an existing project (for older viewers, the Rossendorf High Magnetic Field Lab - it was so successful that they've decided to spend another 100 M€s, or so, of taxpayer money to build a second one ). Basically I'm using the original project and modifying it as necessary. Amongst other things this means that I need to change a few names in some DBs (the addresses remain the same).
I normally work with Symbolic priority, but since I'm changing the name I also tried switching to absolute priority, but this didn't help. The project is integrated in Step7 and according to the first two lines the sycronisation was successful, however the two error lines don't make any more sense to me in English than they originally did in German!
The Symbol I'm tring to modify is DB999.DBX2.7 which I wanted to change from UV22_DIN_Fault to ZV1_DIN_Fault.
If anybody has any ideas what the problem is and how to clear it I'd be very grateful.
Cheers
Roy
I've got a new project which is based very closely on an existing project (for older viewers, the Rossendorf High Magnetic Field Lab - it was so successful that they've decided to spend another 100 M€s, or so, of taxpayer money to build a second one ). Basically I'm using the original project and modifying it as necessary. Amongst other things this means that I need to change a few names in some DBs (the addresses remain the same).
I normally work with Symbolic priority, but since I'm changing the name I also tried switching to absolute priority, but this didn't help. The project is integrated in Step7 and according to the first two lines the sycronisation was successful, however the two error lines don't make any more sense to me in English than they originally did in German!
The Symbol I'm tring to modify is DB999.DBX2.7 which I wanted to change from UV22_DIN_Fault to ZV1_DIN_Fault.
If anybody has any ideas what the problem is and how to clear it I'd be very grateful.
Cheers
Roy