WinCC flexible question

arocon

Member
A
Join Date
Oct 2006
Location
Dubai
Posts
171
Could anybody tell me how these alarms got data (attached alarm). I have highlighted alarm no 1521 for example. The Trigger tag for this alarm is EN-RT-VFD1_Trigger2 bit 1. But Tag EN-RT-VFD1_Trigger2 has no address as you can see and it is internal tag. But this alarm is coming from sinamics S120 drive. If the Tag is internal tag then how this tag got data ?

Capture.jpg
 
Hi I would assume it is in a script.

Click on the tag then do ctrl-g to cross reference it

ps.. whats the availability of work in Dubai?
 

Similar Topics

A
WinCC flexible Question - need reply please
We use Siemens WinCC flexible 2007 for HMI. In the HMI in one screen when one object pressed a faceplate open. In the faceplate many object there...
Replies
2
Views
1,852
ajay34
A
A
WinCC Flexible question
The line in scripts is if SmartTags("Enable\En_Maint_Enable") Then set Bit SmartTags("En_Open"); I did not understand what is the meaning of...
Replies
3
Views
1,650
Manglemender
M
A
WinCC flexible question
We use WinCC flexible 2007 for HMI. There are 3 HMI . One is in the pulpit and the other twos are in local. From local it has ability to jog and...
Replies
1
Views
1,884
Manglemender
M
A
WinCC flexible Question
I have attached here two screen shot. The Local button Animation --- visibility is set as tag EN_LSTN_SPO. But this tag is internal tag. In this...
Replies
1
Views
2,227
balash
B
A
WinCC flexible Question
Attached screen from WinCC flexible Project. Could anyone please tell me how this Button Enable Object work ? Enable Object is not highlighted...
Replies
1
Views
2,738
balash
B
Back
Top Bottom