L D[AR2P#0.0]
Lifetime Supporting Member
Which safety plc are you using ?
Wire two output channels to one solenoid
- Thread starter elmatador
- Start date
Similar Topics
Hi everyone, I need some help I new with omron plc. I using plc CP1L. When I do the program it's good and the plc is function as program. But when...
I am using a siemens output module and I saw that there is also 4 wire diagram for voltage output.
Is there anyone who can explain the reason of...
Good afternoon forum members.
We recently had a fuse blow on the wiring between a 1756-OF6CI analog out card and a control valve (which we have...
We have a stamping press with some prox sensors on the die for slug detection and we just ran into a problem where the output from one of the...
Do you use the PLC input or output address as the wire number or do you use the sheet-line number?
The system that I am currently working on is a...