Yaskawa GL60s PLC

van83619

Member
V
Join Date
May 2022
Location
taiwan
Posts
1
Hi sir
I has a equipment use Yaskawa GL60s PLC via P150 developer,we want to upgreat the system to New,but we have some problems
For example:
On Manual we can see "SUB" function is 1 input、3output,but On program usually see 3input,I don't know what Input 2、3 mean.

Picture 1、2 is program
Picture 3 is user manual

S__26730501_0.jpg S__26730503_0.jpg manual_sub.jpg
 

Similar Topics

B
Extract time from Yaskawa registers in Studio 5000
What is the best way to extract the hour and minute from the register that comes from Yaskawa VFD. In studio 5000 I have a register saved as INT...
Replies
3
Views
123
Bart_PSI
B
E
YASKAWA Control
Hi Everybody, this may be one for you motion control guys. We have been tasked with interfacing some Yaskawa drives into a project where the...
Replies
0
Views
261
exiled
E
N
Yaskawa GA800 VFD bUS [Option Communication Error]
Hello, We have several Yaskawa GA800's installed in our plant. They are all controlled via Ethernet and they work fine. However, they all get...
Replies
0
Views
478
NGCPLC
N
R
Beckhoff IPC with Yaskawa drive MC_HOME not working
Hi Everyone, I have a project involving a Beckhoff IPC with Twincat and a Yaskawa servo motor and drive. I'm trying to use the MC_HOME function...
Replies
2
Views
502
Zensequitur
Zensequitur
N
Trouble setting up generic ethernet module for Yaskawa GA800
Hello, We are having trouble setting up a generic ethernet module for a Yaskawa GA80U4168 drive in RSLogix 5000 Version 20.01. All of the...
Replies
1
Views
611
mike3475
M
Back
Top Bottom