Im Currently building a controlgix project with a 5571 processor and a en2t/d Ethernet card. With the project and PLC in program or remote program i can have comms threw the EN2T card but as soon I move to remote run or to run by switch or RS5000 The comms drop and i cant get back on line. I Hooked up via usb on the processor and fond no errors or Faults. From what i can see as soon as the processor is in run or remote run it stops communicating with the EN2t/d card. I have up loaded the most recent AOP for the card and I’m running revision 10.6 and rslogix5000 version 20.03. Any hints or things I could try would be great. sure its more then likely an User Virus