s7 200 MODBUS

ggchavhan

Member
G
Join Date
Nov 2006
Location
pune
Posts
135
Hi

I want to know that is there any instructions in MICROWIN32 V4.0 for accessing data from MODBUS supported drives I want to control Delta AC drive by S7 200 cpu 222 Plc.
 
i have used S7-200 cpu(224xp)as RTU, & send the list of operation through modbus serial port. up to now I have successfully updated the list of i/o & send the single integer vw information. Now i have send the double integer VD from modbus will it work or not
 

Similar Topics

K
Siemens S7-1200 with Omron M1 - Modbus RTU
Hi all, Currently having trouble getting a speed reference to write over modbus to an Omron M1... I can successfully write a run command and...
Replies
6
Views
303
KalvMavin
K
G
yokogawa controller with modbus tcp/ip communication with s7 1200 plc
can i send and recieve data using my yokogawa UT35A controller with my siemens s7 1200 plc using profinet communication without using gsd file
Replies
1
Views
430
Puddle
P
N
S7-1200 - CarloGavazzi EM340 Modbus Comms
Hello all. I am trying to read out the values from a Carlo Gavazzi EM340 energy analyzer via Modbus communication. The S7-1200 PLC has the CB1241...
2
Replies
29
Views
3,913
Puddle
P
A
From Rosemount 3420 FIM to Softing's FG-200 HSE/FF Modbus
Hi, a customer has an installation on which a Yamatake DCS monitors about 60 Rosemount FF temperature transmitters. The DCS is a Mobdus RTU master...
Replies
4
Views
585
AlfredoQuintero
A
B
Pinout Modbus TCP onto S7-1200 through profinet port
Hello All I have a modbus tcp device(Julabo magio) with an DB9 pin assignment. Pin3=B and Pin8=A. I would like to connect it on the secondary...
Replies
4
Views
1,651
the_msp
the_msp
Back
Top Bottom