SLC 500 Battery expired not EEPROM

Scott180zip

Member
S
Join Date
Oct 2008
Location
Brunswick, OH
Posts
16
1.) ROM/RAM FLASH MEMORY: The SLC500 RAM battery lasts (2) years as I recall. On a non-EEPROM memory - if the battery is not replaced and the PLC is powered down, does the processor lose all of its memory?

2.) How can you verify the date a program was written if it was saved with no changes made: meaning the last date changes were made. Is there a tracking log?

3.) Which PLC Manufactures are using Flash Memory?

Thank you.:confused:
 
Last edited:

Similar Topics

K
Slc 500/03 battery replacement
Where is the battery located ? Is it on the left side of the cpu hidden by the power supply? Thanks
Replies
1
Views
1,681
kalabdel
K
B
How do you replace a battery on a SLC 500 CPU without loosing the program .
Good Morning , How do you replace the battery on a SLC 500 CPU without loosing the program , since you need to remove the CPU , and the...
Replies
11
Views
12,054
tomludwig
T
A
AB SLC 500 Battery Replacement
Does anyone know if a 3.6V, after market battery will work? Or could this possibly cause issues?? Thanks in advance!
Replies
13
Views
6,675
jimtech67
jimtech67
J
slc 500 battery?
I am not real familury with old slc 500 this is 1747-l40a Its droped the program cpu light flashing I assume due to a low battery. So my...
Replies
3
Views
4,511
bkottaras
B
M
SLC-500 SQO info wont go through mask
I have a program that I've used 100 times. SQO settings: File N7:0, Mask 0FFFFh, Dest B3:1, Control R6:0, Length 8, Pos 2. Length & Position...
2 3 4
Replies
48
Views
957
drbitboy
drbitboy
Back
Top Bottom