vic_yubal
Member
Masters,
I have Vijeo Designer v5.1 HMI which is to be link with the BMS using BACNET protocol. I am using the PROTOCON module(Protocol Converter)which converts MODBUS to BACNET. It is connected from PLC through Modbus Port using modbus cable and RS485 to BMS. Now, my problem is how to map the adresses from PLC to BMS System which is using BACNET protocol. Is someone have an Idea about this.
I am using MODICON PLC, part NO. 140CPU67160 redundant system and Magelis HMI XBTGT7340.
I have Vijeo Designer v5.1 HMI which is to be link with the BMS using BACNET protocol. I am using the PROTOCON module(Protocol Converter)which converts MODBUS to BACNET. It is connected from PLC through Modbus Port using modbus cable and RS485 to BMS. Now, my problem is how to map the adresses from PLC to BMS System which is using BACNET protocol. Is someone have an Idea about this.
I am using MODICON PLC, part NO. 140CPU67160 redundant system and Magelis HMI XBTGT7340.