So I have a Rockwell setup here with a (Control Logix) L62 and an EN2T card.
I can ping the card from the command line but RSLogix can't talk to it over Ethernet - only with USB. Also, the controller doesn't see anything else on the network.
I check the that the revision matches in both the General and Module Info tabs.
HELP!
I can ping the card from the command line but RSLogix can't talk to it over Ethernet - only with USB. Also, the controller doesn't see anything else on the network.
I check the that the revision matches in both the General and Module Info tabs.
HELP!