rkduet
Guest
R
I have a dh485 network utilizing 3ea 1747-Net-aic. The network consists of a PV 300 (node 14)connected via 2706-nc13 to port 1 of the net aic and a micro1200 (node 15) connected to port 2 in one panel.This Net-aic is terminated for end node. The Aic is daisey chaned to another panel consisting of a net-aic with aPV600 ( node 2) connected to port 1 via 2706-nc13 and the micro1200 (node 13) is connected to port 2. The third net aic is daisey chained and end terminated for connection of my laptop (node 0). I can see node 14, node 15, and node 13 as long as I don't tie the node 2 cable to the net aic. As soon as I connect I lose the other nodes and and don't see node 2 at all. I have read everything I can find, I'm sure the cabling is right unless the Node 2 PV600 requires special cabeling I don't know about. I'm utilizing the Pic driver in the latest RSlinx version. I would think if that were the problem I wouldn't see any nodes.I know there is issue with the PV550 cabling, does this apply to the PV600? I'm at a loss. Any ideas would be helpful.