NetNathan
Lifetime Supporting Member
I have some 24VDC contact signals and 115VAC to the coil of a contactor to go to an enclosure.
Is there anything wrong with running the 115VAC with the 24VDC in same conduit? I don't really want to run 1 conduit for the 24VDC wiring (5 wires) and another conduit juts to carry a 115VAC signal and neutral.
Is there anything wrong with running the 115VAC with the 24VDC in same conduit? I don't really want to run 1 conduit for the 24VDC wiring (5 wires) and another conduit juts to carry a 115VAC signal and neutral.