140 ACI 030 00 and 140 AVI 030 00

Strokur

Member
Join Date
Jan 2014
Location
Ohio
Posts
62
I was just asked if the 140 ACI 030 00 Analog in Card could be replaced with a 140 AVI 030 00 card in a Schneider/modicon rack. After looking through the specifications I don't see why it couldn't be as long as you had the power budget (which isn't much difference)

Any concerns I should have?
Thanks
 
Looks like setup will be slightly different as the AVI can measure a broader range than the ACI. It can measure what the ACI measures and more.
 

Similar Topics

Hello, I am new to this forum so i'll start off with a simple how is everyone doing? I am curently trying to connect a 2 wire (loop) powered...
Replies
1
Views
4,158
Anyone can instruct or has manual on how to connect to 140 CPU 113 03 via Concept XL 2.6 to upload program backup ? and which connection mode to...
Replies
0
Views
607
Hi, First of all, thanks in advance for those who support and advises. I have a Modbus/TCP operational network as shown below. However, at any...
Replies
0
Views
914
Hi, I have a Modbus/TCP operational network. Last week a NOE 771 01 on one of my Hot Standby PLC System, Standby PLC stopped communicating. On...
Replies
1
Views
1,891
I need to get connected to an older machine that has been in storage for years. It utilizes a Scheider Electric 140 CPU 434 12A. I have not...
Replies
3
Views
2,686
Back
Top Bottom