Col J Mal
Member
Hi , Looking for some help.
We have a 343-1 PN Lean Card & 315-2DP connected to an external system collecting data.
After a recent shutdown both PLC & Lean Card are going into stop mode with SDB100,1001&1002 error messages. These both worked fine for over a year. Any ideas why they may be faulting now.
When the lean card is removed the PLC transitions to Run with no issues. As soon as reconnected it faults.
Thanks
Colin
We have a 343-1 PN Lean Card & 315-2DP connected to an external system collecting data.
After a recent shutdown both PLC & Lean Card are going into stop mode with SDB100,1001&1002 error messages. These both worked fine for over a year. Any ideas why they may be faulting now.
When the lean card is removed the PLC transitions to Run with no issues. As soon as reconnected it faults.
Thanks
Colin