Hi everyone.
im doing a school project making a PLC system regulating temperature in an big fiber switch node.
for simulation im going to run 2 small 12v dc 0,46A fans. 1 fan for simulating the 48V "freecooler" and 1 for simulating an AC compressor for whenever the "freecooler" struggles.
My question. i need an drive that can regulate output from 0-12-15v depending on an input signal of 4-20mA. max current is 0,46A so i want it to be ok for about 1A.
i know this is ok to "DIY" but i don't have the time nor the rescources available.
i need to buy a finish component that i just can plug too a PS and connect fan and my 4-20mA signal from my PLC. also shipping must be within 1 week. ebay is to scary from norway as chineese components are rated with about 1 month shipping time.
Big thanks in advance.
Cato
im doing a school project making a PLC system regulating temperature in an big fiber switch node.
for simulation im going to run 2 small 12v dc 0,46A fans. 1 fan for simulating the 48V "freecooler" and 1 for simulating an AC compressor for whenever the "freecooler" struggles.
My question. i need an drive that can regulate output from 0-12-15v depending on an input signal of 4-20mA. max current is 0,46A so i want it to be ok for about 1A.
i know this is ok to "DIY" but i don't have the time nor the rescources available.
i need to buy a finish component that i just can plug too a PS and connect fan and my 4-20mA signal from my PLC. also shipping must be within 1 week. ebay is to scary from norway as chineese components are rated with about 1 month shipping time.
Big thanks in advance.
Cato
Last edited: