Analog Input using PLC Omron CP1E+MAD11

[budiman]

Wow 2 AM, really thx a lot.
Nite

 

[budiman]

Hi Iant,

May u guide me how to convert BCD to BIN, BIN to BCD, BCD to HEX and etc?
Starting from BCD to HEX first i think.
Thx.

Best Regards,


Budiman Chandra

 

[iant]

If you mean by the PLC the instruction help.
please write the code and I will look at it.
IF it is basic conversion then use the Win 7 Calculator
Change it to the Program mode by the View tab.

 

[budiman]

If you mean by the PLC the instruction help.
please write the code and I will look at it.
IF it is basic conversion then use the Win 7 Calculator
Change it to the Program mode by the View tab.

No, i mean using Cx Programmer to do conversion.
What is the instruction?
Thx.

 

[iant]

Goto - help - instruction help
then select the area you need

 

[chauhan0428]

Hello guy I'm in problems. ...I have cp1e +mad11
I have 0-10 v input ...I want to know how to set 0-10 v input selection by analog adjuster on cp1e.. .
And input address of analog please help please

 

[iant]

With out looking at be documentation I am fairly sure there is a dip switch to change between voltage and current
If not then it is a connection requirement.