Just finished reading P Lucas's question.
Can an instruction be placed in front of the "Call" instruction?
(I have just finished work and haven't proved this.)
Existing code:
PB 10
Seg1.
:C DB254
:***
DB254 (Machine timing values)
DW0 KT=002.1
etc
etc
The machine has two recipes, both use the same timing values.
Due to changes there needs to be a third recipe added, in which
these values need to be changed and thus machine speed will quicken.
I was hoping to program DB255 with new timing values for third recipe.
New code
PB 10
Seg 1
If recipe1 or 2 selected Call DB254
If recipe3 selected Call DB255
Is this possible?
Thanks
Can an instruction be placed in front of the "Call" instruction?
(I have just finished work and haven't proved this.)
Existing code:
PB 10
Seg1.
:C DB254
:***
DB254 (Machine timing values)
DW0 KT=002.1
etc
etc
The machine has two recipes, both use the same timing values.
Due to changes there needs to be a third recipe added, in which
these values need to be changed and thus machine speed will quicken.
I was hoping to program DB255 with new timing values for third recipe.
New code
PB 10
Seg 1
If recipe1 or 2 selected Call DB254
If recipe3 selected Call DB255
Is this possible?
Thanks