CaseyK
Member
Tark said:
Not around here!
But it does have good information, and good for light reading at bedtime.
regards.....casey
Breaker/Fuse/Wire Selection Chart For Motors
- Thread starter kbcombs
- Start date
Not around here!
But it does have good information, and good for light reading at bedtime.
regards.....casey
kbcombs
Member
OP
Yes, thank you lancie1. Your spreadsheet is quick and easy to use. Just what I was looking for. 
93lt1
Member
rta53 said:
Here's the link to the PocketPC 2002 version:
http://www.sscautomation.com/downloads/PocketPC_Motor_Protection.zip
Let me know if there are any problems.
Similar Topics
I have customer who used strip heaters to heat a metal platen.
Due to the harsh environment and process the heater fail some what frequently...
Hi everyone:
we have Baumuller AC drive BM4463 300A 160KW, it drives Baumuller AC motor DST2-315BO54W-020-5-A (90KW;RPM 200; 365V; 215A;83Hz)...
Hello all.
It's already have been discussed here and over internet, but I'd like to have your opinion again on the topic.
If you physically...
The cards have two internal 3.15A fuses, one for each group, and a 0.5A max current loading per point @ 60°C (140°F).
They also have a 5A surge...
I am getting a small machine from Europe. For whatever reason there isn't a circuit breaker after the disconnect switch for the electrical panel...