aamirawan91
Member
I am creating a project with WinCC Unified v16 Upd6 (PC runtime) with an S7-1200. The communication is good between the PC and the PLC as I can see the correct values on my IO field. The indication lights are also working properly, but the buttons on my screen that are linked to PLC tags are not working. Buttons that are used to change screens are working as they are not linked to PLC tags. There is no communication issue; I am sure of that. If there was any communication issue, the lights and the IO fields would not work properly. Tags are properly addressed. I have double-checked that too. I configured the button this way:
Events > Press > SetBitInTag
Tag: Start conveyor
Value: 0
Then I changed the value to 1 but that didn't work either. What am i doing wrong? I have also attached the button properties snap.
Events > Press > SetBitInTag
Tag: Start conveyor
Value: 0
Then I changed the value to 1 but that didn't work either. What am i doing wrong? I have also attached the button properties snap.