FactoryTalktotheHand
Member
Anybody ever get these two talking over Ethernet? Or at all? I saw that the C-More is FINS compatible but I didn't see anything about FINS-TCP support.
C-More to Omron G9SP Safety Controller
- Thread starter FactoryTalktotheHand
- Start date
Similar Topics
Has any one connected the Cmore panel to an Omron NJ PLC if so how?
I have been reading up on the FINS communication protocol, Seems a bit fuzzy...
I am trying to display some scaled analog input values on a C-more Micro terminal, from an older C200H Omron PLC. The addresses appear to simply...
Version 3.81 of AdvancedHMI is now available and includes drivers for many of the Omron PLCs. It has FINS over Ethernet and FINS over serial which...
Hi,
I am installing a machine using an Omron CP1H plc with a HMI from EZAUTOMATION model EZ3. The cables was built as per shown on documents from...
We are currently upgrading one of our assembly machines which has an Omron CPM2A PLC with a C-more micro HMI but it will not communicate with the...