Hi guys,
We've an application to control a few units of valve actuators. These modulating actuators are running 24V AC. Control from PLC is 0-10V DC.
Attached is the wiring diagram for the actuator, can we short the 24V AC Common with the 0-10V Common as shown in the wiring diagram?
We've an application to control a few units of valve actuators. These modulating actuators are running 24V AC. Control from PLC is 0-10V DC.
Attached is the wiring diagram for the actuator, can we short the 24V AC Common with the 0-10V Common as shown in the wiring diagram?