John Morris
Lifetime Supporting Member
Hi guys
Probably another rookie question, but here it goes.
OK I assign N110, N111, and N112 to the cpu's 2, 3, and 4, respectively. Ill have alarm inputs from each of these. How do I point them back to CPU1 to halt machine state.
Any help would be appreciated.
Thank you in advance
Probably another rookie question, but here it goes.
OK I assign N110, N111, and N112 to the cpu's 2, 3, and 4, respectively. Ill have alarm inputs from each of these. How do I point them back to CPU1 to halt machine state.
Any help would be appreciated.
Thank you in advance