jesus_mora
Member
- Join Date
- Mar 2005
- Posts
- 1
I have 3 plcs s7-200 cpu 214-1bc01-0xbo, and only can load program from one.
The others give me right information about cpus features but give a cable comunication problem when y tried to load progran in pg, instead are all the same model. I´m using V.3.2 Step 7 microwin SP 4, onboard ppi card and ppi cable. is there a hardware way in this model to blokc program loadings?
The others give me right information about cpus features but give a cable comunication problem when y tried to load progran in pg, instead are all the same model. I´m using V.3.2 Step 7 microwin SP 4, onboard ppi card and ppi cable. is there a hardware way in this model to blokc program loadings?