Control of Plc through multiple pc stations

yousaf_siemens

Member
Y
Join Date
Apr 2017
Location
Lahore
Posts
4
hi friends i have siemens s7-300 plc with 315-s2dp cpu installed at the plant. it is being controlled by two pc stations. the profibus from dp port of plc is connected to one of the cpus of pc and an ethernet cable is taken out of that cpu and another ethernet cable is taken out from the other cpu and both cables are connected to the lan connectors of e-tech wireless modem 54 mbps. the software at pc is wincc flexible and i want to know how to configure wincc from two or more pc stations and moreover want to know the purpose of that modem.
 

Similar Topics

S
To control motor through PLC
Hi All, From several days I Trying to get the solution of my problem but i didn't get the solution. In my Company we have old Adjustable speed...
2
Replies
21
Views
4,289
jraef
J
Y
Control of a single plc through multiple pc stations
hi friends i have siemens s7-300 plc with 315-s2dp cpu installed at the plant. it is being controlled by two pc stations. the profibus from dp...
Replies
0
Views
1,487
yousaf_siemens
Y
S
How to control LED RGB light through PLC?
For example I have PLC that works with Codesys. Sorry my questions are going to be complete dumb. How do i wire such a lamp to PLC? Directly or...
Replies
8
Views
9,160
Serhioromano
S
S
Control Logix plc --> DCS through CIP
Gentleman, Please tell about DINT array configuration @ communication side Suppose if i want to send Local:3:I.Ch1(reads:1234) to dcs where i...
Replies
2
Views
1,754
Seyed Mohamed
S
R
connect labtop to allen bradley control logix plc through ethernet hub
Hello Everyone I am trying to get online to a control logix plc. I get as far as seeing the ethernet hub in rs linx but , but rs linx doesnt see...
2 3
Replies
34
Views
10,028
dmargineau
D
Back
Top Bottom