Also, I could use a Timer timing bit as well with the T4:1 instructions on rung 2 right?
Yes.
I didn't see why I wouldnt be able to, but want to make sure I am right before I change it.
If you really want to make sure it is right before you change it, follow these simple steps:
1. Go to this link
http://www.thelearningpit.com/
2. Download the free-for-15 days LogixPro simulation software. It stops working after 15 days if you don't pay to get a code number.
3. Run LogixPro on your computer. If you are using Windows 7 or later, you will also need a way to run a virtual Windows XP version. I use VMware Player.
4. Select the "I/O Simulation". This allows simulation of a wide variety of programs, including yours.
5. Load your program into LogixPro, and add rung comments to each rung describing WHAT the rung Output is supposed to DO. You should have added rung comments as the first step - if you can't describe the action, it probably will not work as you expect.
6. Download your program to the simulated PLC.
7. Switch to Online mode, then switch from Program to Run mode.
8. Simulate the photoeye inputs using the built-in input switches.
9. Test your logic to find the errors.