MereNonsense
Member
Hello, world!
I am new to B&R System and I have some tasks with it.
I have two 2005 PLCs that were programed in PG2000 v2.44 (but that was 18 years ago). Now a whole technology station moved to a new place and should be run there.
But one PLC would not go to RUN. It has READY and ERROR LED on.
In PG2000 the PCC Monitor shows zero objects in TC_1(2,3,4), HS_1, EXC, IRQ, DAT. 6 objects in SYSTEM. 2 objects in CONFIG.
I have the original project but when I tried to load it to the PLC I got two errors that I hope someone would explain to me:
1) File c:\pg2000.244\system\diagnose.br cannot be opened.
I have got many those messages while being online.
2) Download Module: "acq_las", Target: "Ram", required: 11508, available 760064 Byte
Download 'acq_las' ERROR
** Download Error during module installation:
AVT Reference not available (3039)
I am new to B&R System and I have some tasks with it.
I have two 2005 PLCs that were programed in PG2000 v2.44 (but that was 18 years ago). Now a whole technology station moved to a new place and should be run there.
But one PLC would not go to RUN. It has READY and ERROR LED on.
In PG2000 the PCC Monitor shows zero objects in TC_1(2,3,4), HS_1, EXC, IRQ, DAT. 6 objects in SYSTEM. 2 objects in CONFIG.
I have the original project but when I tried to load it to the PLC I got two errors that I hope someone would explain to me:
1) File c:\pg2000.244\system\diagnose.br cannot be opened.
I have got many those messages while being online.
2) Download Module: "acq_las", Target: "Ram", required: 11508, available 760064 Byte
Download 'acq_las' ERROR
** Download Error during module installation:
AVT Reference not available (3039)