HI,
I'm trying to figure out why a 1200 Micrologix keeps faulting. S:1/13 = 1 and major error S6=20H. I just inherited this machine and have no documentation. I see in notes left behind that processor has faulted in the past and they noted weight overscale. The bulk of the work this 1200 is doing consists of weighing product. 4 Load cells into 4-20 signal conditioners into AI on the 1200. I see N7:0 and N7:1 at 32767 but S5/0=0 after the fault. This is my first 1200. I usually use 1000's for smaller projects but I admit that the programming in this more complicated than I'm used to.
I'm trying to figure out why a 1200 Micrologix keeps faulting. S:1/13 = 1 and major error S6=20H. I just inherited this machine and have no documentation. I see in notes left behind that processor has faulted in the past and they noted weight overscale. The bulk of the work this 1200 is doing consists of weighing product. 4 Load cells into 4-20 signal conditioners into AI on the 1200. I see N7:0 and N7:1 at 32767 but S5/0=0 after the fault. This is my first 1200. I usually use 1000's for smaller projects but I admit that the programming in this more complicated than I'm used to.