alexbeatle
Member
Goodday!
I have a Fixed Hardware SLC500 (1747-L40a) connected to 1747-DTAM.
Can someone help me upload the program from it?
Trials:
1. 1747-AIC + 1747-UIC:
SLC500 -> 1747-AIC (CPU)
DTAM -> 1747-AIC (Peripheral)
1747-UIC -> 1747-AIC (RS485 network)
Outcome:
SLC500 and DTAM communicate
RSLinx cannot see neither device
Mistake: 1747-UIC only operates at 19200 baud. Communication baud = 9600
2.1747-AIC + 1761-NET-AIC:
SLC500-> 1747-AIC (CPU)
DTAM -> 1747-AIC (Peripheral)
1761-NET-AIC -> 1747-AIC (RS485 network)
Outcome:
SLC500 and DTAM communicate
RSLinx cannot see neither device
RSLinx config:
Device: SLC-CH0/Micro/PanelView
Baud: 9600
Station Number: 11 (DTAM Station Number is 00)
PArity: None
Error Checking: CRC
Stop Bits: 1
Protocol: Full Duplex
Thank you.
I have a Fixed Hardware SLC500 (1747-L40a) connected to 1747-DTAM.
Can someone help me upload the program from it?
Trials:
1. 1747-AIC + 1747-UIC:
SLC500 -> 1747-AIC (CPU)
DTAM -> 1747-AIC (Peripheral)
1747-UIC -> 1747-AIC (RS485 network)
Outcome:
SLC500 and DTAM communicate
RSLinx cannot see neither device
Mistake: 1747-UIC only operates at 19200 baud. Communication baud = 9600
2.1747-AIC + 1761-NET-AIC:
SLC500-> 1747-AIC (CPU)
DTAM -> 1747-AIC (Peripheral)
1761-NET-AIC -> 1747-AIC (RS485 network)
Outcome:
SLC500 and DTAM communicate
RSLinx cannot see neither device
RSLinx config:
Device: SLC-CH0/Micro/PanelView
Baud: 9600
Station Number: 11 (DTAM Station Number is 00)
PArity: None
Error Checking: CRC
Stop Bits: 1
Protocol: Full Duplex
Thank you.