Hello everyone, friends. I need to make changes to a project that I have done before. S7-300 I made a conveyor using a G120C DP driver for the machine used. While doing this, I used the Standard Telegram 1. PZD-2/2 Communication format together with the Profibus communication network. I was doing operations such as stop, start, speed adjustment of the conveyor via HMI. Now my problem is: The conveyor will be moved to a farther point. And reaching the hmi screen is a waste of time. I was asked to leave a Manual selector switch, a back and forth button and a speed adjustment pot. I struggled a bit, I chose Macro number 1 to run back and forth to try.
p1003 : 300
p1004 : 400
I entered the values.
+24V to DI0 (terminal 5). When I give it, there is no movement on the conveyor.
How can I solve this problem? Am I missing something with the wiring or have I entered a missing parameter? Can you please help me? Thanks in advance. Please see attachment.
p1003 : 300
p1004 : 400
I entered the values.
+24V to DI0 (terminal 5). When I give it, there is no movement on the conveyor.
How can I solve this problem? Am I missing something with the wiring or have I entered a missing parameter? Can you please help me? Thanks in advance. Please see attachment.