GayanCeylon
Member
Hi All,
I had to replace one of my drives(SIEMENS G120C) in my conveyor system. the problem I'm having is the motor is running fine in manual mode without any issues. Once I run it automatically F7900 error comes on the drive. The new Drive was working fine previously, and I was experimenting with it on my DIY test bench. I downloaded the parameters to the new drive Via TIA 15.1 (download to Device). before downloading the parameters I set the IP and the Profinet name. What can be the problem?
I had to replace one of my drives(SIEMENS G120C) in my conveyor system. the problem I'm having is the motor is running fine in manual mode without any issues. Once I run it automatically F7900 error comes on the drive. The new Drive was working fine previously, and I was experimenting with it on my DIY test bench. I downloaded the parameters to the new drive Via TIA 15.1 (download to Device). before downloading the parameters I set the IP and the Profinet name. What can be the problem?