help with plc choice

GwJQ2ca.jpg
 
i may be way off base?
i figured each door switch needs a rung and timer to allow in and out traffic.
i only want alarm to sound if door is LEFT open more than 15 sec.

each timer will turn on corresponding led on the control panel if door is closed.

Door switch is MADE when closed.

led should remain OFF if door is open more than 15 sec?

any door open/light off should initiate buzzer. buzzer can be silenced for 10 minutes and then reset back on until all doors are closed and all lights are ON.

I know this ladder isn't right but it's what I have started with.

NO I DO NOT HAVE PROGRAMMING EXPERIENCE. but I could make this system work with 8 pin relays and timers on a din rail.
 

Similar Topics

Hi everyone! I'm a newbie in a PLC field, and I want to study WAGO controllers. Just for my own purpose at the beginning. I want to control some...
Replies
8
Views
4,877
I have a network with 4 PLCs PLC1 is controllogix and PLCs 2-4 are compactlogix and they all need to communicate. The current way I have this...
Replies
8
Views
264
So to start off: I have no experience with PLC's, but I'm good at figuring stuff out, but I need some help to know if my PLC is just dead in the...
Replies
2
Views
117
Hi guys, I have no experience when working with AllenBradley PLC, but I hope someone could clarify the result of multiplication shown in the...
Replies
14
Views
2,201
Back
Top Bottom