Hi
I'm simulating a display in FT ME using RSLogix Emulate 500. outputs in RSLogix 500 are activated immediately, but in the HMI are delayed about 2 seconds. communication I'm using is OPC SERVER as shown in the following video:
http://www.youtube.com/watch?v=8qnBSoR7ko4&feature=channel_video_title
to be this time delay in FT ME?
I'm simulating a display in FT ME using RSLogix Emulate 500. outputs in RSLogix 500 are activated immediately, but in the HMI are delayed about 2 seconds. communication I'm using is OPC SERVER as shown in the following video:
http://www.youtube.com/watch?v=8qnBSoR7ko4&feature=channel_video_title
to be this time delay in FT ME?
Last edited: