Blown99
Member
Got a new customer recently that uses Maple System HMI's and CompactLogix L303ER controller
I did not do the original programing of this system. They were not happy with the previous company and hired us.
I have inserted a new rung in the controller that has a new tag associated with it. The tag was created in the controller using "User-Defined Tags".
I cannot get the Maple Systems Ezwareplus programming software to get a new set of tag information from the PLC. When I tell the EZWare to "Get Tag Info..." in System Parameters. the Windows spinner for Windows 10 just spins. And then after about a min. the system says "not Responding".
I did the same thing from 2 different computers at the customers location.
Anyone have any suggestions.
I did not do the original programing of this system. They were not happy with the previous company and hired us.
I have inserted a new rung in the controller that has a new tag associated with it. The tag was created in the controller using "User-Defined Tags".
I cannot get the Maple Systems Ezwareplus programming software to get a new set of tag information from the PLC. When I tell the EZWare to "Get Tag Info..." in System Parameters. the Windows spinner for Windows 10 just spins. And then after about a min. the system says "not Responding".
I did the same thing from 2 different computers at the customers location.
Anyone have any suggestions.