Dear all
I want to configure 660 ppr encoder to micrologix 1000 I used HSC instruction as per help I turned on C5:0/UA bit on, but I am not getting high speed pulses for measurment, It is scanning as per regular scan, i.e. PLC is missing some pulses during the same scan. Please guide me in this regard.
Thanks.
I want to configure 660 ppr encoder to micrologix 1000 I used HSC instruction as per help I turned on C5:0/UA bit on, but I am not getting high speed pulses for measurment, It is scanning as per regular scan, i.e. PLC is missing some pulses during the same scan. Please guide me in this regard.
Thanks.