Hello,
Well I'm back to my project that many of you have helped me with. The plc that I have is a ML1400. My goal was to message some data from a Controllogix (Logix5555) to the micrologix. As I was thing to teach myself how to setup a MSG message instruction I found nothing to allow a communication to a Controllogix processor. In fact I found nothing to setup ethernet comes except for SLC5/05. Does anyone have any experience or helpful thoughts.I need to message from the controllogix to the micro1400 over ethernet. The data being transferred will be 8 sets of floating type numbers. EX. of one set of numbers,105 or105.5 bla bla bla...Thanks in advance
Well I'm back to my project that many of you have helped me with. The plc that I have is a ML1400. My goal was to message some data from a Controllogix (Logix5555) to the micrologix. As I was thing to teach myself how to setup a MSG message instruction I found nothing to allow a communication to a Controllogix processor. In fact I found nothing to setup ethernet comes except for SLC5/05. Does anyone have any experience or helpful thoughts.I need to message from the controllogix to the micro1400 over ethernet. The data being transferred will be 8 sets of floating type numbers. EX. of one set of numbers,105 or105.5 bla bla bla...Thanks in advance